Regenerative Thermal Oxidizers

Regenerative Thermal oxidizers are units that are used to effectively destroy noxious particles that are present in the air, usually emitted in many industrial process exhaust systems. These units are used for destroying the very harmful particles in the air by simply capturing the heat coming from the outgoing air stream used to preheat incoming air. This usually has the beneficial effect of helping to significantly reduce operating costs. Cycle Therm, a world-class company dedicated to designing, manufacturing and installing Regenerative Thermal oxidizers that are used for the effective destruction of VOCs (Volatile Organic Compounds), HAPs (Hazardous Air Pollutants) and other odorous emissions.

Thermal oxidizers are known to work on the principle of combustion and they also use a very high temperature that is produces by combustion so as to successfully break down hazardous gases into clean air to be discharged into the atmosphere. Thermal oxidizers are mainly of two classes - that is, based on their heath recovery functions - the Regenerative Thermal oxidizers (also known as RTO) and the recuperative oxidizers.

Experts totally recommend Regenerative Thermal oxidizers because they are a lot more durable and provide a longer usage lifespan when compared to recuperative oxidizers; the RTO's ceramic beds are known to also offer improved thermal efficiency. The thermal efficiency of Regenerative Thermal oxidizers is about 90 to 95% when compared to the 50 to 75% offered by the recuperative thermal oxidizer. Thanks to the increase in thermal efficiency offered RTOs, this will result to energy savings and reduced operational expenses as well. Are you presently in the market for Regenerative Thermal oxidizers? Your best bet is choosing RTOs designed, manufactured and installed by Cycle Therm.

Why Choose Cycle Therm's RTOs?

The answer is pretty simple, if you compare Cycle Therm's RTOs with any other type of RTO, you will discover these distinct advantages: " Patented Electromechanical Valve & Drive System Cycle Therm's valve drive is the most hassle-free and also the lowest maintenance valve & drive system that you can find in the market today. This is not like other Regenerative Thermal oxidizers which are known to feature very (very) problematic hydraulic or pneumatic valve systems, the Cycle Therm's RTOs are known to feature very simple, electronic-mechanical valve and drive systems, which in turn provides years of hassle-free continuous service.

" An Exclusive Patented Heat Recovery Media Cycle Therm's RTO's feature Ultra ceramic heat recovery media which is also an exclusive, patented "ultra low" pressure drop media - please know that this, feature is exclusive to Cycle Therm RTOs. The result of the combination of very high heat with low pressure drop is lower electric and gas usage, and also a much higher volatile organic compound destruction efficiency - this of course makes Cycle Therm RTO's one of the most environmentally responsible pollution control units in the market.

" Integrated Manifolding Regenerative Thermal oxidizers manufactured by Cycle Therm incorporates the inlet and outlet exhaust manifolds into the Regenerative Thermal oxidizers total shell configuration, instead of fabricating the usual network of annoyingly bulky, exterior room-consuming manifolds. This will of course eliminate all the external RTO insulation and ductwork, therefore enabling the units to sit flat on concrete pads without legs.